WalterW
November 10, 2017, 2:02pm
1
I have a simulation that references a Custom Series with;
Close(0,GetSeries("Employee"))
But after running a simulation today (11/10/2017), when I inspect the Series, there’s a note;
Series data is NOT current. Data last saved 09/13/2017 with end date 09/09/2017.
Click 'Update' to make current.
Are Series no longer automatically updated?
Walter
aschiff
November 10, 2017, 4:14pm
2
I’ll look into it. Did you manually update it afterwards?
aschiff
November 10, 2017, 6:04pm
4
In that case, it may have been a server-side caching issue if you pulled up the custom series before running the simulation. The first thing I did was check the custom series you mentioned, and it was up-to-date when I checked it.
WalterW
November 10, 2017, 6:44pm
5
Oh, I see! I’ll try another test case but after the sim, I’ll log out and then back again. Hopefully, the series with bre up to date.
Thanks,
Walter
WalterW
November 10, 2017, 6:51pm
6
Hey Aaron,
Yes you are correct. The CS updated as expected.
Thanks again,
Walter